Key Features of Pole Mounted Transformers
Our pole mounted transformers are designed for overhead distribution where a ground mounted unit is impractical. The round corrugated tank, sealed construction and lightweight frame make the unit suitable for mounting directly onto a distribution pole.
Key Features
- Optimised Core and Coil: Step-lap wound core and carefully matched windings give high efficiency, low no-load loss and low audible noise.
- Low High Low Windings: The winding arrangement improves short circuit withstand strength and heat dissipation.
- Dual Voltage Design: Designs meet the basic insulation level (BIL) and short circuit requirements of the target utility standard.
- Sealed Construction: Multiple cover clamps, self resealing pressure relief valve and a sealed tank prevent water ingress and oil leakage.
- Utility Ready Hardware: Lifting lugs, surge arrester bracket provision and clearly marked low voltage leads simplify pole installation.
Pole Mounted Series
300 kVA Pole Mounted Transformer
Coil Material: Copper / Aluminium • Primary Voltage: 10-35 kV • Frequency: 50 Hz / 60 Hz • Pole mounted distribution transformer
250 kVA Pole Mounted Transformer
Coil Material: Copper / Aluminium • Primary Voltage: 10-35 kV • Frequency: 50 Hz / 60 Hz • Pole mounted distribution transformer
200 kVA Pole Mounted Transformer
Coil Material: Copper / Aluminium • Primary Voltage: 10-35 kV • Frequency: 50 Hz / 60 Hz • Pole mounted distribution transformer
100 kVA Pole Mounted Transformer
Coil Material: Copper / Aluminium • Primary Voltage: 10-35 kV • Frequency: 50 Hz / 60 Hz • Pole mounted distribution transformer
75 kVA Pole Mounted Transformer
Coil Material: Copper / Aluminium • Primary Voltage: 10-35 kV • Frequency: 50 Hz / 60 Hz • Pole mounted distribution transformer
50 kVA Pole Mounted Transformer
Coil Material: Copper / Aluminium • Primary Voltage: 10-35 kV • Frequency: 50 Hz / 60 Hz • Pole mounted distribution transformer
37.5 kVA Pole Mounted Transformer
Coil Material: Copper / Aluminium • Primary Voltage: 10-35 kV • Frequency: 50 Hz / 60 Hz • Pole mounted distribution transformer
25 kVA Pole Mounted Transformer
Coil Material: Copper / Aluminium • Primary Voltage: 10-35 kV • Frequency: 50 Hz / 60 Hz • Pole mounted distribution transformer
15 kVA Pole Mounted Transformer
Coil Material: Copper / Aluminium • Primary Voltage: 10-35 kV • Frequency: 50 Hz / 60 Hz • Pole mounted distribution transformer
Technical Specifications
| Item | Specification |
|---|---|
| Type | Pole mounted / overhead distribution transformer |
| Rated Capacity | 15 – 333 kVA |
| Primary Voltage | 10 / 11 / 20 / 33 / 35 kV |
| Secondary Voltage | 0.4 kV |
| Frequency | 50 / 60 Hz |
| Phase | Single phase / Three phase |
| Cooling Type | ONAN (Oil Natural Air Natural) |
| Insulation Level | 24 kV class: 50 kV AC / 125 kV BIL; 35 kV class: 70 kV AC / 170 kV BIL |
| Connection Type | Dyn11, Yyn0 (others on request) |
| Impedance Voltage | 15 kVA: 4.0 %; 100 kVA: 4.5 %; 250-333 kVA: 6.0 % |
| Protection Grade | IP54 (higher on request) |
| Insulation Class | Class A (oil immersed) |
| Standard Compliance | IEC 60076, IEEE C57.12, CE, ISO 9001 / 14001 |
| Application | Single phase: light load rural and residential; Three phase: industrial, utility and commercial |
Note: when ordering beyond the above conditions, please consult our engineering team so we can confirm a suitable design for your project.
Typical Applications
- Rural electrification and overhead distribution networks
- Residential and light commercial load centres
- Utility pole mounted distribution in developing regions
- Temporary and construction site power supply
Customisation Options
- Protection & Enclosure: Higher IP rating, enhanced anti-corrosion coating, lightning and water protection
- Load Switch & Protection: Optional circuit breakers, fuses, load break switches and overload protection
- Monitoring & Measurement: Temperature sensors, voltage and current meters, remote monitoring interfaces
- Capacity & Dimensions: Custom rated capacity, special mounting dimensions and wiring configurations
How We Support Your Project
- Pre-Sales Technical Consultation: Our engineers review your load list, single line diagram and site conditions to confirm the correct rating, voltage class and construction before you order.
- Customization Support: Winding material, impedance, tapping range, enclosure protection degree and accessory set can all be tailored to your project specification.
- Installation & Commissioning Support: General arrangement drawings, installation manuals and remote engineering assistance for accurate installation and minimal downtime.
- After-Sales Support: Remote troubleshooting, maintenance guidance and fast spare parts availability to keep the transformer in reliable service.
FAQ
What is the minimum order quantity for pole mounted transformers?
For pole mounted transformers the minimum order quantity is normally 10 units per model. For large scale or fully customised projects the quantity can be discussed.
What is the typical lead time?
Standard pole mounted transformers are normally delivered within 30 days after order confirmation. Customised units may take longer, and the schedule is confirmed with the quotation.
What warranty do you offer?
We offer a warranty on the supplied equipment together with free lifecycle maintenance guidance. The exact warranty period is confirmed in the commercial offer for your project.
Which standards are they built to?
Pole mounted units are designed and tested to IEC 60076 and IEEE C57.12, with CE marking and ISO 9001 / 14001 quality and environmental management.
Why Buyers Choose Youge
- Customised power solutions delivered for international industrial and utility projects
- Trusted by distributors and EPC contractors across multiple export markets
- Routine and type tested in house to IEC 60076 / IEEE C57.12 before dispatch
Request a Quotation
Send us your transformer requirements — capacity, primary and secondary voltage, frequency, quantity and application. Our engineering team will reply with a technical proposal and quotation.
Email info@xsdfftransformer.com | Phone / WhatsApp +86 158 6789 7761 | WhatsApp +852 2416 2620
